(I have copied this post across to this section on behalf of Paul Reilly. And Paul, when last I looked you can get "pulls" of the original Darnell moulds from Mountfleet Models. Adam is the sub enthusiast there.)
Hello everyone
I'm new to modelling submarines and am in the process of rebuilding a Darnell T-Class boat that I managed to get.
It has inspired me to build a U-Class but am having trouble sourcing a suitable kit in large scale (I want her to be R/C) of either 1/48 or 1/32, or in between.
I have a 3D printer and would be happy to try to make one from this medium, or if an old Darnell kit were available that someone would sell?
Thanks
Paul
Hello everyone
I'm new to modelling submarines and am in the process of rebuilding a Darnell T-Class boat that I managed to get.
It has inspired me to build a U-Class but am having trouble sourcing a suitable kit in large scale (I want her to be R/C) of either 1/48 or 1/32, or in between.
I have a 3D printer and would be happy to try to make one from this medium, or if an old Darnell kit were available that someone would sell?
Thanks
Paul
Yesterday at 4:46 pm by tsenecal
» RC Drift Gyro for pitch control
Sun Oct 20, 2024 2:04 pm by geofrancis
» WW2 mini sub build
Thu Oct 17, 2024 2:34 pm by geofrancis
» sonar data link
Mon Oct 14, 2024 4:31 pm by geofrancis
» Robbe Seawolf V2
Sat Oct 12, 2024 3:52 pm by geofrancis
» ExpressLRS - 868/915 Mhz equipment
Fri Oct 11, 2024 8:58 pm by Marylandradiosailor
» Flight controllers as sub levelers
Fri Oct 11, 2024 8:14 pm by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Thu Oct 10, 2024 3:21 am by tsenecal
» Microgyro pitch controller corrosion
Wed Oct 02, 2024 11:32 am by geofrancis